Flat

Hot Rolled Coils (HRC) / Sheets

  • Standard: ASTM, GB, JIS, BS, AISI, DIN, etc.
  • Grade: Q195, Q235B,Q345B, SS400, SM400B, etc.
  • Thickness: 1.5mm to 15.75mm
  • Width: 1250mm – 1500mm

Cold Rolled Coils (CRC)

  • Standard: ASTM, GB, JIS, BS, AISI, DIN, etc.
  • Grade: DC01, ST12, SPCC, Q195, Q235, etc.
  • Thickness: 0.4mm to 2.5mm
  • Width: 1000mm to 1250mm

Hot Dipped Galvanized Steel Coils / Strips (HDG/GI)

  • Standard: ASTM, GB, JIS, BS, AISI, DIN, etc.
  • Grade: Q195, Q345, SGCC, DX51D, DX52D, S350GD, ASTM A653M, etc.
  • Thickness: 0.15 mm to 3.5mm
  • Width: 30mm to 1250mm
  • Zinc Coating: Z-60g to 350g /m2
  • Spangle: Regular, Minimized, Zero
  • Surface: Chromated, Oiled or Dry
  • Coil I.D.: 508mm or 610mm

Pre-painted Hot Dipped Galvanized Steel Coils (PPGI)

  • Standard: ASTM, GB, JIS, BS, AISI, DIN, etc.
  • Grade: SGCC, DX51D, DX52D, S350GD, ASTM A792, etc.
  • Thickness: 0.23mm to 1.2mm
  • Width: 900mm to 1250mm
  • Paints: PE
  • Color: RAL Scale
  • Coil I.D.: 508mm or 610mm

Hot-DIP Aluzinc steel Coils (Galvalume)

  • Standard: ASTM, GB, JIS, BS, AISI, DIN, etc.
  • Grade: DX51D, DX52D, S250GD, S550GD, etc.
  • Thickness: 0.25mm to 1.6mm
  • Width: 900mm to 1250mm
  • Surface: Chromated, Anti-finger printed
  • Coil I.D.: 508mm or 610mm

Pre-painted Aluzinc Steel Coils (PPGL)

  • Standard: ASTM, GB, JIS, BS, AISI, DIN, etc.
  • Grade: DX51D, DX52D, S250GD, S550GD, etc.
  • Thickness: 0.25mm to 1.2mm
  • Width: 914mm to 1250mm
  • Paints: PE, PVDF, SMP, HDP
  • Color: RAL Scale
  • Coil I.D.: 508mm or 610mm

Aluminium Coils / Strips

  • Alloy: 1070, 1060, 1050, 1145, 1235, 1035, 1100, 1200, 3A21, 3003, 3103, 8011, etc.
  • Temper: H18, H19, H14, H22,H24, H26, etc.
  • Thickness: 0.2mm to 6.0mm
  • Width: 20mm to 2200mm

Electrical Tinplate (ETP)

  • Grade: SPCC, Q195, MR
  • Thickness: 0.15mm to 0.50mm
  • Width: 300mm to 1050mm
  • Tin Coating: 2.8g/2.8g, 5.6g/5.6g etc
  • Surface Finish: Bright, Stone, Silver, Matte
  • Coil I.D.: 508mm
  • Temper: T2 - T5, DR8 - DR10
  • Annealing: BA, CA.

 


Long

Angle Bar

  • Standard: ASTM, GB, JIS, BS, AISI, etc.
  • Grade: Q195, Q235, Q275, Q420, etc.
  • Size: 20mmx20mm to 200mmx200mm
  • Thickness: 3mm to 24mm

Deformed Bar

  • Standard: ASTM, GB, JIS, BS, AISI, etc.
  • Grade: HRB400, HRB500, BS4449 Gr460, ASTM Gr60, etc.
  • Diameter: 6mm to 40mm
  • Length: 6m to 12 m

Wire Rod

  • Standard: ASTM, GB, JIS, BS, AISI, etc.
  • Grade: Q195, Q235, SAE1006B, SAE1008B, etc.
  • Surface: round, no twisted, light and smooth
  • Diameter: 5.5mm up

Light Rail

  • Standard: ASTM, GB, JIS, BS, AISI, etc.
  • Grade: Commercial Quality
  • Weight: 6Kg or 9Kg
  • Length: 6-12m

 


Pipe/Tube

Round Steel Pipe

  • Grade: Q195, Q235B, Q345B, S235JR, S275JR, STK400/500, etc.
  • Wall Thickness: 0.3mm to 2.2mm
  • Outer Diameter: 10.3mm to 609.6mm
  • Length:0.3m to 12m
  • Surface Treatment: Pre Galvanized, Hot dipped Galvanized, Black Painted (varnish coating), Bared, Oiled, PE,3PE, FBE, Corrosion Resistant Coating, Anti Corrosion Coating
  • Pipe Ends: Plain, Beveled, Thread with Coupling or Cap, Chamfer, Groove, Screw
  • End protector: Plastic Pipe Cap, Iron Protector, Clamp
  • Technique: Electronic Resistance Welded (ERW), Electronic Fusion Welded (EFW), Double Submerged Arc Welded (DSAW)
  • Application: Construction , Low Pressure Liquid, Water, Gas, Oil, Line Pipe

Square/Rectangular Steel Pipe

  • Grade: Q195, Q235, Q345, SS330, SS400, SS500, ST52, ST37, S235JR, S235JO, S235J2, etc.
  • Technique: ERW, Hot Rolled, Cold Rolled Black Annealed, Cold Drawn, Galvanized
  • Size: 20x20mm to 600x600mm / 20x30mm to 600x800mm
  • Wall Thickness: 0.5mm to 17.75mm
  • Length: Less than 12 Meters
  • Pipe Ends: Plain, Beveled, Thread with Coupling or Cap, Chamfer, Groove, Screw
  • End Protector: Plastic Pipe Cap, Iron Protector, Clamp

 


Semi-finished

Billets

  • Standard: ASTM, GB, JIS, BS, AISI, etc.
  • Grade: 3SP, 5SP, Q235, Q275, etc.
  • Size: 80mm / 120mm / 130mm / 150mm etc. as per customer's requirement
  • Length: As per customer's requirement

 


Raw Materials

Iron Ore

We, a mill purchases representative for iron ore, are looking for Fe+ higher than 60%. If you could supply, we would like to build up a long term relationship with you. Our mill will sign a contract with mine owner or representative export company directly. Our payment term is non-transferable 100% DLC (98+2). And, please send following documents to us.

  • History record document (such as B/L copy, CIQ report at discharging port)
  • FCO
  • Inspection report issued by SGS.
  • Your company profile for ICPO.
  • We might need port storage agreement and transportation contract.

Heavy Melting Steel Scrap

  • Bonus
  • P&S
  • HMS No.1/2 80/20%
  • Shredded Density 65 Lbs up

We sale our steel expertise and experience. Contact Us »